snia S10-210 Exam Questions

Questions for the S10-210 were updated on : Nov 21 ,2025

Page 1 out of 7. Viewing questions 1-15 out of 97

Question 1

You need to add an iSCSI host and storage array to your environment. Your manager wants at least
two options that allow all iSCSI initiators to query a central management server to locate the address
of all iSCSI resources (e.g., iSCSI initiators, targets, switches, and management stations).
Which two protocol methods would be used? (Choose two.)

  • A. Directory Name Service protocol (DNS)
  • B. Simple Network Management Protocol (SNMP)
  • C. Internet Storage Name Server protocol (iSNS)
  • D. Service Location Protocol (SLP)
Answer:

C,D

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 2

Which two cloud deployment models address data privacy issues? (Choose two.)

  • A. Community
  • B. Public
  • C. Private
  • D. Hybrid
  • E. Campus
Answer:

C,D

User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
vote your answer:
A
B
C
D
E
0 / 1000

Question 3

The system administrator has received complaints about the decreased performance of two LUNs.
When you investigate the port being used to connect to the LUNs, you discover that the port has
achieved its maximum throughput. You also discover that there are other ports available on the
storage array that are not oversubscribed.
Which specific driver is needed to balance workloads between the host and storage?

  • A. SCSI driver
  • B. TCP/IP driver
  • C. Failover driver
  • D. Multi-path driver
Answer:

D

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 4

Only one of many servers is suffering poor performance with a nearline (Tier 2) storage system. The
server administrator has not discovered any obvious root cause. The server has multiple paths to the
storage system but only one path is active. Routine monitoring by the storage administrator has
determined that a single storage port has received a high number of bad frames.
What should the SAN administrator do?

  • A. Determine the source of duplicate frames.
  • B. Verify that the host ports are correctly zoned.
  • C. Find the source of frames with CRC errors.
  • D. Collect new performance data and compare to the baseline.
Answer:

C

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 5

Which type of storage replication is required, at a minimum, for a non-critical application?

  • A. Synchronous
  • B. Asynchronous
  • C. Semi-synchronous
  • D. Multi-synchronous
Answer:

B

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 6

A solution architect needs to know how your switches enforce zoning. The enforcement method and
identification type being used in your current FC switches must provide the highest level of security.
Which zoning enforcement should you use?

  • A. Session-based without hardware support
  • B. Frame-based and hardware support
  • C. Software-based with hardware support
  • D. Frame-based and software enforced
Answer:

B

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 7

Click the Exhibit button.

Referring to the configuration shown in the exhibit, when will the servers oversubscribe the
connections between the storage array and the switch?

  • A. When the 6th server is added to the configuration
  • B. When the 7th server is added to the configuration
  • C. When the 8th server is added to the configuration
  • D. When the 9th server is added to the configuration
Answer:

A

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 8

Two different departments have funded the purchase of a new director-class switch. Each
department wants to have control of the fabric. Two logical switches will need to be created, each
with its own set of administrators.
Which feature must be enabled on the switch to do this?

  • A. ACL
  • B. Virtual SAN
  • C. Virtual LAN
  • D. Virtual Fabrics
Answer:

D

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 9

Click the Exhibit button.

Which protocol is represented by the frame shown in the exhibit?

  • A. FCoE
  • B. iSCSI
  • C. Ethernet
  • D. Fibre Channel
Answer:

D

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 10

A business critical enterprise resource planning (ERP) system uses a central database at a company's
primary data center. The company has built an out-of-region disaster recovery data center and
intends to implement a standby ERP system with an eight hour RTO and 30 minute RPO.
Which architectural approach to implement service continuity for the ERP database will meet the
RTO and RPO targets?

  • A. Implement asynchronous replication of the ERP database, application, and middle tiers to ensure the ERP system is back online with less than 30 minutes of data loss within eight hours of an event.
  • B. Implement asynchronous replication of the ERP database, application, and middle tiers to ensure the ERP system is back online with less than eight hours of data loss within 30 minutes of an event.
  • C. Perform daily full database backups to tape and overnight ship the backup tape media from one data center to the other to ensure the ERP system is back online with less than eight hours of data loss within 30 minutes of an event.
  • D. Implement synchronous database replication and configure application logic to ensure transactions are identical in both data centers as the recovery objectives do not allow for any inflight data loss.
Answer:

A

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 11

You have twelve 500 GB drives and you need to provide two LUNs using RAID 6 protection for a
customer.
What will be the size of eachLUN?

  • A. 1.5 TB
  • B. 1.75 TB
  • C. 2 TB
  • D. 2.25 TB
Answer:

C

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 12

You are installing an OLTP application on a new server. The I/O profile of the application consists of
100% random read operations of 8 kilobyte transfers. You need to determine which HBA to use in
your application to accommodate 50,000 IOPS.
What is the minimum FC link speed that will satisfy the application's requirements?

  • A. 1 Gbps
  • B. 2 Gbps
  • C. 4 Gbps
  • D. 8 Gbps
Answer:

C

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 13

After provisioning a new LUN to a host, new storage cannot be detected on the host. Which three
actions should be performed to troubleshoot this problem? (Choose three.)

  • A. Scan memory on a host.
  • B. Scan for new storage on the host,
  • C. Verify that LUN mapping is correct.
  • D. Verify that zoning on the FC switch is correct.
  • E. Verify that the size of memory pages and block size is the same.
Answer:

B,C,D

User Votes:
A
50%
B
50%
C
50%
D
50%
E
50%
Discussions
vote your answer:
A
B
C
D
E
0 / 1000

Question 14

Your organization operates in a regulated environment and contracts with a service provider to
manage tape backup media for highly confidential, secure data.
Using SNIA Storage Security Best Practices, which two statements are correct? (Choose two.)

  • A. Tape backup media is stored in a secure, temperature controlled vault.
  • B. The service provider keeps unencrypted backup media locked during transport.
  • C. All removable media is encrypted and backup media locked during transport.
  • D. The customer manages the chain of custody.
Answer:

A,C

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000

Question 15

Your company performs a full backup of a database server every Saturday night and incremental
nightly backups for each day of the week thereafter. It takes 14 hours to perform a restore from a full
backup and averages two hours for each incremental restore. The database server fails on
Wednesday at 10:10 AM and needs to be fully restored.
What it is the RTO?

  • A. 16 hours
  • B. 18 hours
  • C. 20 hours
  • D. 22 hours
Answer:

C

User Votes:
A
50%
B
50%
C
50%
D
50%
Discussions
vote your answer:
A
B
C
D
0 / 1000
To page 2