Question 1

Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32
Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?

• A. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
• B. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
• C. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
• D. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules

Question 2

Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server.
They get an error and cannot proceed
Which tool should you use to troubleshoot the problem?

• A. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered
• B. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
• C. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
• D. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.

Question 3

Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced
these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?

• A. HPE OneView offers additional functionalities for HPE Primera like CPG management
• B. HPE OneView offers limited support tor HPE Primera because of the firmware differences
• C. To manage HPE Primera using HPE OneView. a dedicated license is required
• D. Management procedures and features are the same tor both types of the array

Question 4

DRAG DROP
Put the steps of the HPE infosight flow in the correct order.

Question 5

Which statement about a new HPE SimpliVity deployment is true?

• A. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
• B. A new HPE SimpliVity node can be a member of multiple dusters
• C. AM new HPE SimpliVity models are software optimized
• D. All new HPE SimpliVity models are based on mid CPUs

Question 6

Which statement about HPE Superdome nPars is true?

• A. Chassis in the same nPar can have different CPU configuration
• B. Rack Management Controller is required Tor nPar configuration
• C. Chassis in the same nPar can have different memory configuration
• D. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors

Question 7

Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company
purchased 50 HPE.
ProLiant DK385 Gen10 Plus v2. They plan to manage the new systems using HPE OneView as well.
What should the customer do to manage rack system using HPE OneView?

• A. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
• B. connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.
• C. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
• D. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.

Question 8

As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer
modules which HPE Synergy Composer 2
Why would you recommend this change?

• A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
• B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
• C. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
• D. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

Question 9

The proposal consists of.
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)

• A. The selected interconnect modules do not provide the requested WWN virtualization
• B. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
• C. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
• D. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
• E. Remove 4 HPE Composer 2 modules from the design, as they are not required

Question 10

Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?

• A. CPG management
• B. Volume provisioning
• C. Cache management
• D. Replication setup

Question 11

Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following
configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute
nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following
configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards
Which statement about the planned configuration change is true?

• A. Four compute modules must be moved to the second frame to balance the configuration
• B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
• C. A license for an extended logical enclosure must be added to HPE OneView through GUI
• D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Question 12

DRAG DROP
Match HPE Superdome Flex system with its specific feature.

Question 13

Your customer manages an HPE Synergy platform using HPE OneView 5.6. To leverage new
functionalities, the customer wants to update HPE OneView to version 61
Which statement about this update process is true?

• A. To update to 6,1, the customer has to first update to 6 0, which is a milestone edition.
• B. The customer can update directly to 6,1, but HPE OneView downtime will be longer.
• C. Before updating to 6,1, customer should increase memory size on the HPE Composer.
• D. The customer must check the HPE Composer version, as 61 is supported only with HPE Composer2.

Question 14

DRAG DROP
Match HPE SimpliVity term with the definition.

Question 15

DRAG DROP
After HPE Superdome Flex deployment and nPar setup, you need to verify health status of HPE
Superdome Flex components.
Put the steps on the left into the coned order on the right to perform this task.