HP HPE0-S59 Exam Questions
Questions for the HPE0-S59 were updated on : Dec 01 ,2025
Page 1 out of 7. Viewing questions 1-15 out of 104
Question 1
Which statement about the HPE Synergy Image Streamer is true?
- A. Image Streamer can manage firmware and driver baselines across multiple frames.
- B. Image Streamer is used to deploy OS images to the internal disks of compute modules.
- C. Image Streamer is responsible for the configuration of network settings across Synergy frames.
- D. Image Streamer can manage OS images, firmware, and drivers across multiple frames.
Answer:
D
Question 2
Which statement about the HPE D3940 storage module is true?
- A. Only one type of drives (SATA, SAS, SSD) can be installed in each module.
- B. It is configured through CLI available from HPE Synergy console.
- C. SATA drives require redundant IO adapters to be installed in this module.
- D. Up to five modules can be installed in a single frame with Gen10 servers.
Answer:
C
Question 3
You discovered that somebody deleted the SSO certificate that affects accessing iLO from HPE
OneView from an iLO processor in an HPE Synergy compute node.
How will you recover from this problem?
- A. Login to the HPE Composer CLI and use the efuse procedure for the affected server.
- B. Remove the affected server from HPE OneView and add it again to reconfigure the iLO processor.
- C. Navigate to HPE OneView, locate the affected server hardware and use Refresh option.
- D. Navigate to HPE OneView, locate the affected server hardware and use the Reset iLO option.
Answer:
C
Question 4
What is a restriction of using a RoCE network?
- A. This network type does not support sFlow and remote port monitoring.
- B. This network type does not support the smart link and private network features.
- C. This network type is not supported with HPE Virtual Connect SE 100Gb F8 Module for HPE Synergy.
- D. This network type by default is configured as untagged network and cannot be a part of a network set.
Answer:
B
Question 5
Your customer with an HPE Synergy environment needs to prevent a timeout and loss of
communication during an external switch firmware upgrade.
Which parameter can the customer configure within an uplink set to meet their requirements?
- A. The customer should set the connection mode to manual.
- B. The customer should disable LACP failover trigger.
- C. The customer should enable LACP load-balancing.
- D. The customer should set LACP timer to long.
Answer:
D
Question 6
HOTSPOT
Click the option that will allow you to create an OS Deployment Plan with customized kickstart.
Answer:
None
Question 7
One of the administrators added some connections within a server profile that was created using a
template. This server profile did not report inconsistency.
What is the most likely reason for this behavior?
- A. The administrator removed FC connections that are not monitored by default.
- B. Connections defined in the server profile are not monitored for compliance.
- C. Consistency check for connections is set to Minimum or Not checked.
- D. The server is in maintenance mode and does not report any issues.
Answer:
C
Question 8
HOTSPOT
Click the area within the management interface that will allow you to check whether an HPE
OneView SSO certificate is properly applied.
Answer:
None
Explanation:
The area to check for the HPE OneView SSO certificate is under Security, then HPE SSO.
Here's why:
Security: This section deals with all security-related settings, including certificates.
HPE SSO: This stands for "Single Sign-On" and is the specific technology that HPE OneView uses for
integrated authentication. The certificate will be listed here if it's properly applied.
To get to this section, you would click on "Security" in the left-hand navigation menu, and then "HPE
SSO" in the main content area.
Question 9
When should Private Network be enabled?
- A. When a customer needs the ability to create a network dedicated to a single compute node.
- B. When a customer needs additional network security by limiting traffic flow for the given network.
- C. When a customer needs a heartbeat network between two compute nodes for building a cluster.
- D. When a customer needs each port associated with a given uplink set to be 100Gb/s.
Answer:
B
Question 10
Your customer plans to deploy HPE OneView for VMware vCenter Server together with HPE Storage
Integration Pack for VMware vCenter.
The customer wants to use them to manage HPE Synergy Gen10 compute modules, HPE ProLiant
Gen10 servers, and an MSA array.
Which statement about compatibility of the existing environment with the planned software
components is true?
- A. Both HPE Synergy Gen10 full-height compute modules plugins will require a license.
- B. HPE OneView for VMware vCenter Server does not support standalone HPE ProLiant servers.
- C. Not all of HPE Storage Integration Pack for VMware vCenter features are supported with MSA arrays.
- D. HPE ProLiant Gen10 systems require HPE OneView for VMware vCenter server licenses for each node.
Answer:
C
Question 11
Your customer is trying to grow a VMware cluster using HPE OneView for VMware vCenter Server.
They get an error and cannot proceed.
Which tool should you use to troubleshoot the problem?
- A. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
- B. HPE OneView for VMware vCenter Server to verify if the server profile template is properly imported and registered.
- C. vCenter Server to use the HPE OneView for VMware vCenter plugin to import the cluster for HPE OneView management.
- D. iLO interface of a given HPE Synergy compute node to verify whether this node is registered within HPE OneView.
Answer:
B
Question 12
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the
compute nodes has the appropriate storage controller installed and two 12Gb SAS switches installed
in the first fabric.
The customer reports that the compute nodes cannot access the storage module.
What will you verify first when troubleshooting this problem?
- A. If the SAS logical interconnect is a part of the logical enclosure and has a healthy state.
- B. If the D3940 module is imported in a managed state that allows volume provisioning.
- C. If there is at least one iSCSI network configured that will provide access to the module.
- D. If the D3940 storage module is properly licensed through the HPE OneView interface.
Answer:
A
Question 13
Which statement about HPE Superdome Flex firmware updates is true?
- A. RMC CLI can simultaneously update complex firmware for multiple HPE Superdome systems.
- B. RMC CLI is the only tool that can be used to update HPE Persistent Memory firmware.
- C. HPE OneView is the only tool that can be used to perform I/O updates.
- D. HPE SUM is the only tool that can be used to update HPE Persistent Memory firmware.
Answer:
A
Question 14
Refer to Exhibit:
Your customer plans to update the firmware for the logical interconnect shown.
Based on the information in the exhibit, which statement about network connectivity is true?
- A. Only the manual orchestration method will allow a firmware upgrade without causing network downtime.
- B. It is possible to update this logical interconnect without network downtime if orchestrated method is used.
- C. Compute nodes will experience network downtime if the Force option is selected, as it will enforce parallel update.
- D. Compute nodes will experience network downtime not longer than 1 minute regardless of the orchestration method.
Answer:
B
Question 15
Your customer changed the storage pool state from managed to discovered.
What is the impact of that change?
- A. This storage pool can be deleted using HPE OneView interface.
- B. All volumes from that pool will be removed from HPE OneView.
- C. Volume provisioning will be disabled for that storage pool.
- D. Storage pool parameters cannot be modified using HPE OneView.
Answer:
C