bcs TM12 Exam Questions
Questions for the TM12 were updated on : Nov 21 ,2025
Page 1 out of 5. Viewing questions 1-15 out of 65
Question 1
Which of the following would you expect to be most likely an example of a demotivating factor for
testers?
Number of correct responses: 2
- A. The management asks the testers to be kept informed about the intensity, quality and results of testing
- B. The testers’ recommendations to improve the system or its testability are adopted by the development team
- C. The same regressions tests are manually executed by the same testers, for every product release, without regression test tools
- D. The testers are assessed on whether and how often they detect important and critical failures
- E. Test quality is measured by counting the number of customer/user reported problems.
Answer:
C, E
Question 2
Which of the following would you expect to be most likely an example of a motivating factor for
testers?
Number of correct responses: 1
- A. The resources allocated for the testing activities are not sufficient and don’t allow the testers to contribute to the quality of the product
- B. The testers contribution to the quality of the software products developed from an organization is recognized with increased responsibilities
- C. The same regressions tests are executed manually by the same testers, for every product release, without any progression in content
- D. The testers are asked to perform, in parallel with their testing tasks, other tasks unrelated to their testing responsibilities
Answer:
B
Question 3
An agile development team decides to hire a tester who has always worked:
- in independent test teams, reporting the problems found in a defect tracking system
- in safety-critical projects, with a stronger focus on the quality of the product than on time and
budget.
This agile team is focused on short-term goals to get the product released on time and within
budget.
Which of the following answers would you expect to be most likely true in this scenario?
Number of correct responses: 1
- A. Agile teams like the presence of a tester in their teams and the tester will be able to adapt to the new context without any issue
- B. The developers will immediately follow the guidelines described by the tester
- C. The tester can continue to report the problems found in a defect tracking system and be more focused on the quality than on time and budget constraints
- D. The tester’s mission could be to verify adherence to requirements, instead of reporting formally the problems in a defect tracking system
Answer:
D
Question 4
Assume you are managing the system testing execution phase of a project.
The system test execution period for that project is scheduled for eighteen weeks and the release
date is scheduled at the end of system testing.
During the sixth week of system test execution, at the staff meeting, the project manager informs
you that the project deadlines are changed and the release date that is only three weeks ahead.
This new release will not allow the completion of the system tests. Suppose also that you have
followed a risk-driven test approach for this project.
Which of the following statements represents the worst way to lead your test team in the next three
weeks?
Number of correct responses: 1
- A. Neglect your management activities and work side-by-side with your test team executing tests
- B. Considering the executed tests, you should reduce the test coverage back on the risk analysis and adjust downward the priority of the associated risk items
- C. Convince all the people of your test team that each of them is an important and needed member, and that their contribution is fundamental to the success of the team
- D. Favor and encourage a proactive attitude where people ask for new tasks as soon as they finish their current tasks
Answer:
A
Question 5
You are using this skills assessment spreadsheet in order to define a training development plan for
your test team.
Your objective is to fill the skill gaps by having at least a team member rated as an expert for each
skill identified for the “technical expertise” and “testing skills” sections, and with the ability to train
the other team members.
Considering the budget constraints you can send only one person to a training course.
Based only on the given information, which of the following answers would you expect to be the best
option to achieve your objective?
Number of correct responses: 1
- A. Send Robert to a performance testing training course
- B. Send Alex to a performance testing training course
- C. Send John to a performance testing training course
- D. Send Mark to a test automation training course
Answer:
B
Question 6
Your test team consists of four members (Mary, Bob, Mark, Dave) with different interpersonal skills.
The following skills assessment spreadsheet shows the characteristics of the team members with
respect to a list of interpersonal-skills (for each characteristic only the member with the highest level
of that characteristic is indicated and marked with ‘X’):
On the next project a member of your test team will have to perform some routine tasks requiring
collaboration with other teams.
Who in your test team would you expect to be most suitable at doing these tasks?
Number of correct responses: 1
- A. Mary
- B. Bob
- C. Mark
- D. Dave
Answer:
A
Question 7
Consider the following analysis of testing skills performed on four people: Alex, Robert, John and
Mark (all the skills have been rated on an ascending scale: The higher the score, the better the skill):
Which of these people, based on this analysis, would you expect to be most suitable to work
specifically as test designer?
Number of correct responses: 1
- A. Alex
- B. Roberta
- C. John
- D. Mark
Answer:
B
Question 8
Assume you are a Test Manager involved in system testing of a CRM application for a Pay-TV
company. Currently the application is able to support a proper number of users assuring the required
responsiveness. Since the business is expected to grow, you have been asked to evaluate the ability
of the application to grow to support more users while maintaining the same responsiveness.
Which of the following tools would you expect to be the most useful at performing this evaluation?
Number of correct responses: 1
- A. Coverage tools
- B. Test management tools
- C. Static analysis tools
- D. Performance tools
Answer:
D
Question 9
After a selection process you have selected a test management tool that is going be introduced in
your organization and used by your test team in a pilot project.
You have already identified the member of your test team who will be the administrator of the tool,
since he/she has a significant experience with the administration of test management tools and so
he/she is able to make effective and efficient up-front decisions about "how" the tool will be used.
You have also developed a training plan for the other members of your test team.
In collaboration with the administrator of the tool you have also devised standard ways of managing,
storing and maintaining the tool and its assets including backup/restore procedures.
You have also analyzed standard formats supported by the tool (CSV, XLS, XML, etc.) to export, import
and archive all the information managed by the tool itself (requirements, test case specifications,
test plans etc.) for compliance with the most important test management tools, in order to minimize
the impacts of migrating this information to a new tool that could replace the existing one in the
future.
Which of the following phases in the lifecycle of the new tool has NOT been adequately considered in
this description?
Number of correct responses: 1
- A. Acquisition
- B. Support and maintenance
- C. Evolution
- D. Retirement
Answer:
C
Question 10
Assume you are the Test Manager in charge of independent testing for avionics applications.
You are in charge of testing for a project to implement three different CSCI (Computer Software
Configuration Item):
- a BOOT-X CSCI that must be certified at level B of the DO-178B standard
- a DIAG-X CSCI that must be certified at level C of the DO-178B standard
- a DRIV-X CSCI that must be certified at level A of the DO-178B standard
These are three different software modules written in C language to run on a specific hardware
platform.
You have been asked to select a single code coverage tool to perform the mandatory code coverage
measurements, in order to meet the structural coverage criteria prescribed by the DO-178B
standard. This tool must be qualified as a verification tool under DO-178B.
Since there are significant budget constraints to purchase this tool, you are evaluating an open-
source tool that is able to provide different types of code coverage. This tool meets perfectly your
technical needs in terms of the programming language and the specific hardware platform (it
supports also the specific C-compiler).
The source code of the tool is available.
Your team could easily customize the tool to meet the project needs. This tool is not qualified as a
verification tool under the DO-178B.
Which of the following are the three main concerns related to that open-source tool selection?
Number of correct responses: 3
(2 credits out of 3 credits correct, 1 credit point)
- A. Does the tool support all the types of code coverage required from the three levels A, B, C of the DO-178B standard?
- B. Does the tool have a good general usability?
- C. What are the costs to qualify the tool as a verification tool under the DO-178B?
- D. Is the installation procedure of the tool easy?
- E. Does the tool require a system with more than 4GB of RAM memory?
- F. Is the licensing scheme of the tool compatible with the confidentiality needs of the avionics company?
Answer:
A, C, F
Question 11
Assume you are managing a test automation project for a mission-critical system.
Because vendor provided tools and open source solutions don't meet the needs of this project, you
ask your test team to develop a custom automation framework.
Which of the following management issues associated to the development of this custom
automation framework is least likely to manage?
Number of correct responses: 1
- A. Proper testing for the custom automation framework must be performed
- B. The custom automation framework will require an adequate documentation
- C. The changes to the custom automation framework should be communicated to all external users of this tool under the GNU license
- D. The custom automation framework will need proper maintenance
Answer:
C
Question 12
In your organization the following tools of the same vendor are currently in use: a requirements
management tool, a test management tool and a bug tracking tool.
You are the Test Manager.
You are currently evaluating a test automation tool of the same vendor (to complete the vendor's
tool suite) against an interesting open-source test automation tool under the GNU GPL (General
Public License).
There are no initial costs associated to that open-source tool.
Which of the following statements associated to the selection of the open-source tool is correct in
this scenario?
Number of correct responses: 1
- A. The open-source tool can be modified but only if the community of developers of that tool gives you the formal permission to modify it
- B. There are no initial costs for the open-source tool but you should carefully consider the costs associated to the integration with the existing tools and also evaluate the recurring costs
- C. There are no initial costs for the open-source tool because open-source tools are usually low- quality, while vendor tools have always a better quality than the corresponding open-source tools
- D. The open-source tool can be modified but it can’t be distributed further in any way
Answer:
B
Question 13
Which of the following statements about the STEP test process improvement model is true?
Number of correct responses: 1
- A. In the STEP model, tests validate the requirements and use cases when they are developed
- B. The STEP model stresses defect detection and demonstration of capability, whereas the defect prevention is a secondary potential goal of testing
- C. The STEP model assures that the system requirements specification and the test design specification processes don't overlap
- D. In the STEP model, testware design occurs after coding
Answer:
A
Question 14
Which of the following statements about the TMMi test process improvement model is true?
Number of correct responses: 1
- A. In TMMi all the process areas at lower levels must be 75% complete by achieving specific and generic goals in order to claim the higher level
- B. TMMi provides an approach for test process improvement such as the IDEAL (Initiating, Diagnosing, Establishing, Acting and Learning) model
- C. TMMi has a staged architecture for process improvement with seven maturity levels
- D. At TMMi level 1 testing is chaotic without a defined process, and it is often seen as the same as debugging
Answer:
D
Question 15
Consider the following statements describing the importance of improving the test process:
I. Test process improvement is important because being focused only on the test process it can
provide recommendations to improve the test process itself, but it can’t indicate or suggest
improvement to areas of the development process
II. Test process improvement is important because it is much more effective than software process
improvement to improve the quality of a software system
III. Test process improvement is important because several process improvement models (STEP, TPI
Next, TMMi) have been developed over the years
IV. Test process improvement is important because every organization, regardless of the context,
should always achieve the maximum level of maturity of testing described in the test improvement
models such as TMMi
Which of the following answers is correct?
Number of correct responses: 1
- A. I. and IV. are true; II. and III. are false
- B. I., II., III. and IV are false
- C. I., II. and III are true; IV. is false
- D. I., II. and III. are false; IV. is true
Answer:
B